Description
Gas Turbines and Jet Engines, Non-Aircraft; and Components

Includes
Airflow Deflectors; Turbine Cases; Turbine Housings; Compressor and Turbine Rotors; Compressor and Turbine Rotor Blades; Combustion Chamber; Accessory Gear Box; Turbine Disks and Hubs; Turbine Vanes.

Excludes
Engine Fuel System Components (FSC 2910); Engine electrical System Components (FSC 2920); Engine Cooling System Components (FSC 2930); Engine Air/Oil Cleaners/Filters/Strainers (FSC 2940); Engine Accessories (Air Duct Heaters, Engine Mounted Control Assemblies) (FSC 2990).

Notes
Engines and Components classified in this FSC are primarily for use on non-aircraft equipment but can also be used on aircraft ground support equipment.

Possible NAICS Codes
333611 – Turbine and Turbine Generator Set Units Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332510 – Hardware Manufacturing
336411 – Aircraft Manufacturing
334519 – Other Measuring and Controlling Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336412 – Aircraft Engine and Engine Parts Manufacturing
332991 – Ball and Roller Bearing Manufacturing
333613 – Mechanical Power Transmission Equipment Manufacturing
339950 – Sign Manufacturing

Includes
Mercury Vapor Turbines.

Possible NAICS Codes
333611 – Turbine and Turbine Generator Set Units Manufacturing
335313 – Switchgear and Switchboard Apparatus Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
339991 – Gasket, Packing, and Sealing Device Manufacturing
336611 – Ship Building and Repairing

Includes
Compressor and Turbine Rotors; Blades; Combustion Chamber; Accessory Gear Box; Afterburner; Exhaust Cone; Reservoirs, Hydraulic; Tank, Oil.

Excludes
Oil, Air, Anti-icing, and Hydraulic Regulators, Valves, and Pumps specially designed for Gas Turbines and Jet Engines (FSC 2995); Control Assemblies, Push-Pull (FSC 2995); Engine Mounted Control Assemblies (FSC 2995); Fuel System Components (FSC 2915); Engine Electrical System Components (FSC 2925); Engine Cooling System Components (FSC 2935); Engine Air/Oil Cleaner/Filter/Strainers (FSC 2945).

Notes
Engines and Components classified in this FSC are intended for use as/on aircraft and/or guided missile prime movers.

Possible NAICS Codes
336412 – Aircraft Engine and Engine Parts Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
314999 – All Other Miscellaneous Textile Product Mills
336411 – Aircraft Manufacturing
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
488190 – Other Support Activities for Air Transportation
332996 – Fabricated Pipe and Pipe Fitting Manufacturing

Includes
Attachments for Tanks, Self-propelled Weapons, and High Speed Tractors; A-frames and Winches specifically designed for truck mounting; Cranes and Crane Booms for Wrecker Trucks.

Possible NAICS Codes
336992 – Military Armored Vehicle, Tank, and Tank Component Manufacturing
333310 – Commercial and Service Industry Machinery Manufacturing
336390 – Other Motor Vehicle Parts Manufacturing
332510 – Hardware Manufacturing
333618 – Other Engine Equipment Manufacturing
336320 – Motor Vehicle Electrical and Electronic Equipment Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
313210 – Broadwoven Fabric Mills
333120 – Construction Machinery Manufacturing
336999 – All Other Transportation Equipment Manufacturing

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
339950 – Sign Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
333120 – Construction Machinery Manufacturing
326220 – Rubber and Plastics Hoses and Belting Manufacturing

Includes
Carburetors; Fuel Pumps; Engine Fuel Filters; Fuel Controls, Jet Engine; Fuel Primers; Water Injection Controls and Valves; Fuel Valves; Fuel Flow Regulators; Components of Smoke Abatement Systems.

Excludes
Aircraft Fuel Tanks (FSC 1560); In-flight Refueling System Fuel Components (FSC 1680). Fuel System Components not specifically designed for use with Aircraft Engines or Missile Prime movers.

Notes
Fuel components specially designed for propulsion fuel systems, aircraft and missiles are to be placed in this FSC.

Possible NAICS Codes
336412 – Aircraft Engine and Engine Parts Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
334419 – Other Electronic Component Manufacturing
332991 – Ball and Roller Bearing Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
339950 – Sign Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
336411 – Aircraft Manufacturing
333611 – Turbine and Turbine Generator Set Units Manufacturing

Includes
Electric Motor Operated Valves; Hydraulic Operated Valves; Solenoid Operated Valves.

Excludes
Engine Intake and Exhaust valves;(FSC 2990, 2815); Valves specifically designed for use with fire fighting equipment,(FSC 4210); plumbing equipment, and the like (FSC 4540).

Possible NAICS Codes
332911 – Industrial Valve Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332919 – Other Metal Valve and Pipe Fitting Manufacturing
332912 – Fluid Power Valve and Hose Fitting Manufacturing
333618 – Other Engine Equipment Manufacturing
336310 – Motor Vehicle Gasoline Engine and Engine Parts Manufacturing
333120 – Construction Machinery Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
333612 – Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

Includes
Engine, Turbine, Wind, and Hand Driven Generator Sets and Auxiliary Aircraft Generators.

Excludes
Motor-Converters: Motor-Generator Sets; Engine Generators; Engine Accessory Generators.

Possible NAICS Codes
335312 – Motor and Generator Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
811310 – Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332991 – Ball and Roller Bearing Manufacturing
335999 – All Other Miscellaneous Electrical Equipment and Component Manufacturing
333613 – Mechanical Power Transmission Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing

Description
Hardware

Includes
Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes
Weapons System Hardware (5342).

Notes
Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible, and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

Possible NAICS Codes
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
423710 – Hardware Merchant Wholesalers
444110 – Home Centers
339999 – All Other Miscellaneous Manufacturing
333618 – Other Engine Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333120 – Construction Machinery Manufacturing

Description
Maintenance, Repair and Rebuilding of Equipment: Engines, Turbines, and Components

Possible NAICS Codes
336412 – Aircraft Engine and Engine Parts Manufacturing
811310 – Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
811111 – General Automotive Repair
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333611 – Turbine and Turbine Generator Set Units Manufacturing
488190 – Other Support Activities for Air Transportation
811490 – Other Personal and Household Goods Repair and Maintenance
336611 – Ship Building and Repairing
336350 – Motor Vehicle Transmission and Power Train Parts Manufacturing

Includes
Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes
Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Possible NAICS Codes
332996 – Fabricated Pipe and Pipe Fitting Manufacturing
332919 – Other Metal Valve and Pipe Fitting Manufacturing
326122 – Plastics Pipe and Pipe Fitting Manufacturing
333618 – Other Engine Equipment Manufacturing
333310 – Commercial and Service Industry Machinery Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333120 – Construction Machinery Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing

Includes
Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Possible NAICS Codes
333613 – Mechanical Power Transmission Equipment Manufacturing
336411 – Aircraft Manufacturing
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332510 – Hardware Manufacturing
336350 – Motor Vehicle Transmission and Power Train Parts Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
333612 – Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

Excludes
Laboratory Jet Pumps (FSG 65 and 66).

Possible NAICS Codes
333996 – Fluid Power Pump and Motor Manufacturing
333914 – Measuring, Dispensing, and Other Pumping Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
326299 – All Other Rubber Product Manufacturing
333310 – Commercial and Service Industry Machinery Manufacturing
333991 – Power-Driven Handtool Manufacturing
333120 – Construction Machinery Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

Includes
Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes
Shafts (FSC 3040); Lock Keys (FSC 5340).

Notes
Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation, e.g., shaft and hub, c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

Possible NAICS Codes
332510 – Hardware Manufacturing
332618 – Other Fabricated Wire Product Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336411 – Aircraft Manufacturing
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
444140 – Hardware Retailers
332111 – Iron and Steel Forging
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing

Includes
Automatic Nonpowered Valves; Gate, Globe, Angle, Check, and Relief Valves; Cocks.

Excludes
Fire Hydrants (FSC 4210) Sprinkler Heads (FSC 4210); Valves specifically designed for use with fire fighting equipment (FSC 4210); plumbing equipment and the like (FSC 4540)

Possible NAICS Codes
332911 – Industrial Valve Manufacturing
332919 – Other Metal Valve and Pipe Fitting Manufacturing
336310 – Motor Vehicle Gasoline Engine and Engine Parts Manufacturing
332912 – Fluid Power Valve and Hose Fitting Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333310 – Commercial and Service Industry Machinery Manufacturing
332510 – Hardware Manufacturing