The following Product Service Codes (PSCs) are commonly associated with NAICS 335910, Battery Manufacturing

PSC 6140 Batteries, Rechargeable

Top Result Products

PSC 6135 Batteries, Nonrechargeable

Products
Federal Category 13.3: Electronic & Communication Equipment Electrical & Electronics Equipment

PSC 5977 Electrical Contact Brushes and Electrodes

Products

PSC 5940 Lugs, Terminals, and Terminal Strips

Products

PSC 6130 Converters, Electrical, Nonrotating

Products
Federal Category 13.3: Electronic & Communication Equipment Electrical & Electronics Equipment

Includes
Complete Battery Charging Equipment, Nonrotating; Power Sup-plies, Multiapplication.

Excludes
Rectifying Tubes; (FSC 5960); Rectifying Crystals (FSC 5961); Rotating Equipment (FSC 6125); Transformers (FSC 5950); and Semiconductor Devices and Associated Hardware (FSC 5961).

Notes
This class includes devices employing a means other than mechanical rotation for changing electrical energy from one form to another (i.e., AC to AC, DC to DC, AC to DC, and DC to AC).

Possible NAICS Codes
335999 – All Other Miscellaneous Electrical Equipment and Component Manufacturing
334416 – Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing
335931 – Current-Carrying Wiring Device Manufacturing
335312 – Motor and Generator Manufacturing
333310 – Commercial and Service Industry Machinery Manufacturing
333241 – Food Product Machinery Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336611 – Ship Building and Repairing
335311 – Power, Distribution, and Specialty Transformer Manufacturing
334412 – Bare Printed Circuit Board Manufacturing

PSC 1680 Miscellaneous Aircraft Accessories and Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp Stowed on Board; Cockpit Mounted Control Quadrants; Actuators, Electromechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories Attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports; Electric Windshield Wipers; Aircraft Onboard Inert Gas Generators; Aircraft Furniture; Aircraft Mounted Winches and Hoists; In-Flight Refueling System Components, including Fuel Components; Aircraft Curtains; Cable Tension Regulators; Sun Visors; Rear-View Mirrors; Mechanical Transmissions, Gearboxes and Constant Speed Drives Specially Designed for Aircraft.

Excludes
Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Rotor Brake System Components; Helicopter Automatic Stabilization Equipment.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation
336412 – Aircraft Engine and Engine Parts Manufacturing

PSC 4520 Space and Water Heating Equipment

Products
Federal Category 4.3: Facilities & Construction Facility Related Materials

PSC 5330 Packing and Gasket Materials

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
339950 – Sign Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
333120 – Construction Machinery Manufacturing
326220 – Rubber and Plastics Hoses and Belting Manufacturing

PSC 1560 Airframe Structural Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Flight Control Surfaces, internal and external Auxiliary Fuel Tanks; Exhaust Systems, Pylons, Trim Tabs; Aircraft.

Excludes
Fitted Covers; Helicopter Rotor Brake System and Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the Aircraft.

Notes
This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation

PSC 6150 Miscellaneous Electric Power and Distribution Equipment

Products

PSC 5365 Bushings, Rings, Shims, and Spacers

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Description
Bushings, Rings, Shims and Spacers

Includes
Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes
Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310 and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Notes
All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

Possible NAICS Codes
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336411 – Aircraft Manufacturing
332119 – Metal Crown, Closure, and Other Metal Stamping (except Automotive)
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332439 – Other Metal Container Manufacturing

PSC 6515 Medical and Surgical Instruments, Equipment, and Supplies

Products
Federal Category 10.2: Medical Medical Equipment and Accessories and Supplies

Includes
Anesthesia Apparatus; Blood Transfusion Apparatus; Oxygen Therapy Apparatus; Respirators; Orthopedic Supplies; Arch Supports; Clinical Thermometers; Sutures; Hearing Aids; Veterinary Equipment, Endoscopes, Fiber Optic.

Excludes
Ophthalmic Instruments, Equipment, and Supplies; Non-Medical Endoscopes.

Possible NAICS Codes
423450 – Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers
339113 – Surgical Appliance and Supplies Manufacturing
325411 – Medicinal and Botanical Manufacturing
339112 – Surgical and Medical Instrument Manufacturing